Read all about why our V1.5's are the best on the market for all around performance: Here
The new V1.5 Trailing Arms will allow for the installation of various wheel hub and CV Axle combinations. They promote better suspension geometry while allowing power transfer from the rear differential to drive the rear wheels with gear “0” axle angle. Our V1.5 Trailing Arms comes with variable length adjustments, 3/4" chromoly heim joints and ladder adjusters for 2" of Trailing arm length adjustement while installed on the car, hubs available in 4×100, 4×114.3 or 5×114.3, and bearings with retainers.
Pictures by: Carlos & Zach Alemar