We have good news for those who are looking for support for the 10th and 11th Generation Civic and 6th Generation Integra chassis. We have just created new Plug-N-Play adapter harnesses with "The Harness Shop" to support the "L15B7, K20C1/4, and K20C2" engine in both CVT Auto and Manual configurations. These harnesses allow a Standalone Engine Management System design using a Maxx Ecu Sport, Race, or Pro Engine Management System.
Our harnesses are covered with DR25 Rychem and use the best AWG Standard wire available for the best connection and continuity possible. The idea behind the harness is to adapt the pinout from Maxx Ecu to your 10th and 11th gen OEM Engine harness using OEM plugs for a plug n Play install. Tested to work well with all the factory "Honda Sense," equipment, this harness adapter allows seamless integration of the Maxx Ecu EMS system within the 10th and 11th Gen Civic and 6th Gen Integra vehicles while allowing advanced functions of the Engine to work with Maxx Ecu.
Our harness allows use of all OEM features and functions with the powerful Maxx Ecu ARM Cortex-M3 120MHz main processor to allow lightning-fast processing changes to the configured environment for air, fuel, spark, and boost control, etc. This harness is configured to support E-Throttle and standard Port Fuel injection only and cannot currently support Direct Injection, so a conversion plate and block off plate will be made for you DI converts.
The ECU you select "Sport, Race, Pro" with your adapter harness will determine the amount of additional GPIO input/Outputs you have available. Additional capabilities can be added for an additional cost, or a full Millspec harness can be created for you at your request. Message us for details. Please note that Maxx Ecu Mini or Sport is not included in this listing. This listing is for the Adapter harness "ONLY" and comes with a 1-year warranty against defects. Please allow 3 to 5 weeks for your custom harness to be assembled and shipped to your door.
We also offer other Standalone options for your configurations in various designs. Please check the dropdown menu for options.
Please keep in mind that this listing doesn't provide the Maxx Ecu itself. It is for the Harness Only! These answers can be forwarded to Admin@AKDBuiltPerformance.com, and please provide your order number for order tracking. Answering these questions is important to the specifics of your harness and its design. Please answer truthfully and accurately to ensure proper fit and function.
Also, please specify with your order if your car is made in the US or Canada, whether it has a factory-installed Keyless Access System, if the factory comes with display audio, and if your car comes equipped with a Multipurpose Camera Unit.
Lastly, please note that this harness converts your car to PORT FUEL INJECTION! Maxx Ecu will not control Direct Injectors. ECU Harnesses come with the basic options not including EGT Sensor inputs, Wideband O2 Sensor Connector, and external wideband or Flexfuel sensor Connectors. All can be added for additional cost to make the custom harness of your requirements.
